EZRUN COMBO - MAX8 G2 & 4278/2250KV G2 Motor
Save £10.50
Couldn't load pickup availability
The Max8 G2 ESC is the most sought-after ESC on the market. It’s dynamic and dominant specifications meets the needs of power-hungry users. It has a strong output power with excellent linearity at low speed and is operating on full-sensored mode.
A perfect combination EzRun 4268/4278 G2 Motor
Perfect compatibility when used with EzRzun 4268/4278 G2 motors. Ensures motor is protected against overheating to avoid damage.
Applicable to All Weather Track Conditions
The IP-67 system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sandy, icy, snowy and water without damaging the power unit.
Super Built-in BEC
The ESC has a built-in BEC which can support a maximum output current of up to 15A and the output voltages are switchable between 6V, 7.4V and 8.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market.
Built-in Big Capacitor
The ESC has three built-in 680uF capacitors, which increases the performance by 74% (870uF) compared to the MAX8 ESC. The ultra-large capacitors built onto the ESC also ensures users do not need to install external capacitors on for most vehicles.
New sensored cable interface
The Max8 G2 ESC is equipped with a new type of sensored cable interface. It is high recommended to use the motors from Hobbywing as the waterproof protection level is at the highest level (IP67). Note:
This ESC also supports wires with the standard interfaces on the market.
Specifications
Type
Scale - 1/8th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - Yes
Specifications
Cont./Peak Current - 160A/1050A
Input Voltage - 3-6S Lipo
BEC Output
6V / 7.4V / 8.4V adjustable, continuous current 6A (Switch-mode)
Wires & Connectors
Input Wires - Red-10AWG-150mm*1/Black-10AWG-150mm*1/Red-10AWG-200mm*1
Output Wires
Input Connectors - XT90
Output Connectors - 6.5 Bullet Connectors (Female)
(Note: All the wire length above is the original length not the length you see from the outside.)
Fan
Size - 30x30x10mm
Voltage Range - 6-8.4V
Powered by - BEC
ESC Programing via
SET Button on ESC - Not Supported
LED Program Box - Supported
LCD Program Box - Supported (G2)
OTA Programmer - Supported
Program Port - PRG/Fan Port
Firmware
Firmware Upgrade - Supported
Size & Weight
Size - 60mm*48mm*40.5mm
Weight - 192g
Applications
Motors
Sensored brushless motors / Sensorless brushless motors
Vehicles
1/8th Truck, Monster Truck
KV Rating/T Count
With 4S Lipo: KV≤3000;
With 6S Lipo: KV≤2400 4278 size motor
-----------------------------------------------------------------------------------
4268 Motor
Exquisite appeareance
The exquisite look combined with an innovative heat dissipation structure of the casing truly brings out a product Hobbywing is proud of.
Fully sensored mode High power
The EZRUN series of motors are known to be dynamic and dominant. They are built differently to meet the needs of various demands on the market. It has a strong output power with an excellent linearity at low speed and is operating on full-sensored mode.
A perfect combination EzRun Max 8 G2 ESC
Perfect compatibility when used with EzRzun Max 8 G2 ESC. The motor achieves perfect compatability when used together with EzRun Max 8 G2 ESC. It provides ultra-large torque, precise handling performance, and brings smooth and comfortable control experience to the users.
High quality materials and excellent product design
The materials (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shalf) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time.
Applicable to All Weather Track Conditions
The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including muddy, sandy, icy, snowy and water without damaging the power unit.
Explosion-proof rotor
High hardness aluminum CNC shell
High-precision Endbell plate
Specification
Scale - 1/8th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Pole Count - 4
KV Rating - 2250KV
LiPo - 3-6s
No-load Current(A) - 5.0A
O.D. (mm) - 42
Length (mm) - 78
Shaft Diameter (mm) - 5.0
Weight (g) - 455g
Front Bearing - D16*D5*T5
Rear Bearing - D11*D5*T5
-
Brand
-
Part Number
-
EAN
Delivery
All items available for purchase are displayed with estimated despatch times, these dates are based on the product stock status and processing time.
We use two main status's we use on items,
IN STOCK - These items will ship same day if ordered before 2.30pm
AVAILABLE TO ORDER - These items aren't available for same day despatch and will take a day or two to be despatched.
If your order contains both IN STOCK and AVAILABLE TO ORDER items, the entire order will ship as one once all items are available.
Courier options are displayed at the checkout and will effect delivery times once your order is despatched.
We offer free delivery to most Mainland UK addresses on orders over £125. Deliveries to any off-shore islands, international addresses and certain parts of Scotland/Highlands may incur delivery surcharges. These charges will depend on your postcode and the product(s) you are purchasing, examples shown below. Please contact us to clarify costs prior to purchasing if you are unsure. If you place an order and a delivery surcharge is required, a member of our team will be in contact by e-mail or phone.
- Eire
- Highlands of Scotland
- Isle of Wight
- Isle of Man
- Northern Ireland
- Scottish Islands & Channel Islands
- Republic of Ireland
- EU Countries
In addition to a surcharge, deliveries to the above destinations may take an extra day or two for completion.
Collections
If you choose to collect your order, please note the stock status as this will determine if your order will be able to be collected immediately or may be ready in a day or two. We will contact you via email when your order is ready to be collect. Please wait until you have been informed your order is ready to collect before visiting us to avoid disappointment.
Returns
If for any reason you are dissatisfied with your purchase, we offer a 30 day money back guarantee on all our items that are UNUSED and in their original packaging. Should you receive an item from us that you believe to be faulty, please contact us first to allow us to confirm / diagnose the fault and in many cases we can provide an immediate solution.
All refunds are at our discretion and will only be issued once we have received the returned item(s) and are satisfied that they are in unused condition. We advise that all returned items should to be sent recorded / signed for and insured to the correct product value as Make It Build It cannot be held responsible for returned items that are lost or damaged in transit. Please be aware that any refunds will not include your return postage cost.
If you wish to return any item(s) please contact us first at enquiries@makeitbuildit.co.uk. When shipping your item, please ensure your order number is displayed on the return packaging and included with the item inside the returned packaging. This will ensure that your return is dealt with in a prompt manner.
For more information on our returns policy please see our Terms & Conditions | Make It Build it
