Black Friday

Save more than 35% on selected products

Volantex  |  V759-01

Volantex Asw28 2600mm Glider W/Abs Fuselage Artf


£161.99
RRP: £179.99
Save £18
Notify me when available

This V2 ASW-28 is a hybrid foam and plastic model with a few nice upgrades over the V1. The wings and tail are EPO foam while the fuselage is blow molded plastic which should give it a good blend of durability and performance. You'll need to provide your own radio system and a 3S 1500mAH lipo battery to finish it off.

The battery can be accessed after removing the canopy that is secured with snap locks. The wings now have two spars to provide extra rigidity during loops and high bank turns. The wings are easier to install as well with a plastic latch to secure them in place. The room inside the fuse has been increased over the V1 so you can add FPV gear if that's your thing. We've also added a wheel under the fuselage for rolling landings.

FEATURES

  • Quick, easy assembly, no glue required
  • Beautiful and superb scale design
  • Plastic Unibody design make it much more durable
  • Light weight and durable EPO construction 
  • Big space fuselage make FPV become easier
  • New simpler connections wings
  • Additional strengthening wings
  • Wheel for easy landings

SPECIFICATIONS

Wingspan: 2600mm (102.5 in)
Overall Length: 1132mm (44.6 in)
Flying Weight(without battery): 1050g
Prop Size: 1060 Folding Propeller
Motor Size: 4023 powerful out runner brushless motor
Speed Control: Easy-Plug 30A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 6pcs
Recommended Battery (Required): 11.1V 1800mAh ~ 2200mAh Li-Po
Radio (Required): 2.4Ghz 6-Channels
Charger (Required): 3S LiPo balancing charger, 0.5A
Ailerons: Yes
Flaps: Yes
Minimum Age Recommendation: 14 years
Experience Level: Beginner~Expert
Recommended Environment: Outdoor
Assembly Time: Less than 30min
Is Assembly Required: Yes

REQUIRED TO COMPLETE

  • Transmitter
  • Receiver
  • Battery
  • Charger
Volantex

Volantex Asw28 2600mm Glider W/Abs Fuselage Artf

£161.99

This V2 ASW-28 is a hybrid foam and plastic model with a few nice upgrades over the V1. The wings and tail are EPO foam while the fuselage is blow molded plastic which should give it a good blend of durability and performance. You'll need to provide your own radio system and a 3S 1500mAH lipo battery to finish it off.

The battery can be accessed after removing the canopy that is secured with snap locks. The wings now have two spars to provide extra rigidity during loops and high bank turns. The wings are easier to install as well with a plastic latch to secure them in place. The room inside the fuse has been increased over the V1 so you can add FPV gear if that's your thing. We've also added a wheel under the fuselage for rolling landings.

FEATURES

SPECIFICATIONS

Wingspan: 2600mm (102.5 in)
Overall Length: 1132mm (44.6 in)
Flying Weight(without battery): 1050g
Prop Size: 1060 Folding Propeller
Motor Size: 4023 powerful out runner brushless motor
Speed Control: Easy-Plug 30A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 6pcs
Recommended Battery (Required): 11.1V 1800mAh ~ 2200mAh Li-Po
Radio (Required): 2.4Ghz 6-Channels
Charger (Required): 3S LiPo balancing charger, 0.5A
Ailerons: Yes
Flaps: Yes
Minimum Age Recommendation: 14 years
Experience Level: Beginner~Expert
Recommended Environment: Outdoor
Assembly Time: Less than 30min
Is Assembly Required: Yes

REQUIRED TO COMPLETE

View product